66 20 518 Removing and Installing/Replacing A Front Ultrasonic Transducer (Centre)
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front bumper trim 51 11 FRONT BUMPER
Disconnect plug connection (1) and unclip ultrasonic transducer from retaining lugs (2).
Installation:
Retaining lugs (2) must not be damaged!
Make sure ultrasonic transducer is securely seated.