65 11 075 Removing And Installing/Replacing DVD Changer

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Follow instructions for handling optical fibers. See 61 00... NOTES ON HANDLING OPTICAL FIBERS .

Open glovebox.

Release trim (1) at clips (2).

Installation:

Replace damaged clips (2):

Fig 1: Identifying Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Pull out DVD changer (2) and disconnect associated plug connection.

Tightening torque. See AUDIO, NAVIGATION AND ANTI-THEFT - TIGHTENING TORQUES - X5 .

Fig 2: Identifying DVD Changer With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1) on both sides and remove bracket (2).

Tightening torque. See AUDIO, NAVIGATION AND ANTI-THEFT - TIGHTENING TORQUES - X5 .

Fig 3: Identifying DVD Changer Bracket With Screws

Courtesy of BMW OF NORTH AMERICA, INC.