64 11 849 Replacing SERVODRIVE For Dynamic Pressure Compensation

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove trim for instrument panel, bottom left . See 51 45 181 REMOVING AND INSTALLING/REPLACING BOTTOM RIGHT TRIM FOR INSTRUMENT PANEL .

Release screws (1) and remove air duct (2).

Fig 1: Identifying Air Duct With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove servomotor (2) and disconnect associated plug connection.

Fig 2: Identifying Servomotor And Screws

Courtesy of BMW OF NORTH AMERICA, INC.