63 21 101 Replacing Sealing Frame For Left Or Right Rear Light (On Side Panel)
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear light. See 63 21 180 Removing and Installing/Replacing Left Or Right Rear Light (In Side Panel)
Detach seal for rear light (1) completely from rear light (2). Clean bonding surface and allow to dry.
Installation:
Make sure seal (1) is correctly bonded all round on rear light (2).