62 11 280 Removing and Installing (Replacing) Instrument Cluster
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD protection). See 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)
NOTE:
- Comply with notes and instructions on handling fibre-optic cables. See 61 00... NOTES ON HANDLING OPTICAL FIBERS
Necessary preliminary tasks:
- Extend steering wheel completely and lower
- Disconnect battery negative lead. Refer to61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD
Release screws (1).
Pull back instrument cluster (2) slightly.
Disconnect associated plug connection.
Remove instrument cluster (2).
Replacement:
Carry out programming/coding. Refer toCODING & PROGRAMMING