61 62 030 Removing And Installing/Replacing Wiper Arm On Rear Window

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

61 6 060

Fold up cover cap (1) in direction of arrow.

Release nut underneath.

Tightening torque. See GENERAL ELECTRICAL SYSTEM - TIGHTENING TORQUES .

Fig 1: Folding Up Cover Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Press off wiper arm (1) with special tool 61 6 060 and remove.

Fig 2: Identifying Wiper Arm And Special Tool 61 6 060

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Before fitting wiper arm, allow wiping system to run two wipe cycles into park position.

Adjust measurement (A) between wiper arm and rear window edge.

Fig 3: Identifying Measurement Between Wiper Arm And Rear Window Edge

Courtesy of BMW OF NORTH AMERICA, INC.