54 13 150 Removing and Installing Rear Crossmember
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove glass slide/tilt sunroof. See 54 13 080 Removing and Installing Complete Glass Slide/Tilt Sunroof .
- Remove drive. See 67 61 005 REPLACING DRIVE WITH GEAR (FRONT) FOR ACTUATING SLIDE/TILT SUNROOF .
Release screws in marked area.
Tightening torque: 54 12 03AZ. See 54 12 MECHANICAL SUN ROOF COMPONENTS .
Remove cross-member (1).
Installation:
Pitch cables must be correctly laid diagonally in guide.