51 47 126 Replacing Handle On Panel For Luggage Compartment Floor

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Separate both handle halves (3) from each other at catches (2).

Fig 1: Identifying Screws And Handle Halves

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lever (2) and spring (5) on handle recess (1) must not be missing or damaged.

Removing lock cylinder:

Remove lever (2).

Release catches (4) and remove lock cylinder (3).

Fig 2: Identifying Lever And Spring On Handle

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts on handle recess (1) must not be missing or damaged:

2 Fastener
3 Springs
4 Catches

Fig 3: Identifying Fastener And Springs
Courtesy of BMW OF NORTH AMERICA, INC.