51 34 ... Removing And Installing/Replacing Trim For Window Guide Of Left Or Right Rear Door

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove inner window cavity seal . See 51 22 351 REPLACING WINDOW CAVITY SEAL ON INNER LEFT OR RIGHT REAR DOOR .

Pull out rubber guide (1) at trim (2).

Installation:

Moisten rubber guide (1) with water before fitting.

Fig 1: Identifying Rubber Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip cover (1) and carefully pull towards rear.

Release screws (2).

Feed out trim for outer window guide.

Fig 2: Identifying Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Threads (1) of trim (2) must not be damaged.

Fig 3: Identifying Threads Of Trim

Courtesy of BMW OF NORTH AMERICA, INC.