LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1435 (Body Equipment - Repair) >> 24 Trunk Latch, Locks >> 51 24 010 Adjusting Rear Lid Latch For Rear Lid Upper Section

51 24 010 Adjusting Rear Lid Latch For Rear Lid Upper Section

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Prerequisite: 

Slacken screws for Soft Close Automatic system.

Adjust Soft Close Automatic system and tighten down screws.

Close rear lid, check gap dimensions  and checking closing comfort. See BODY GAP DIMENSIONS .

If necessary, repeat procedure.

NOTE: When rear lid is closed, Soft Close Automatic system must not make contact with or brush against rear lid lock. Look out for scratches.
Fig 1: Locating Screws
G04791664Courtesy of BMW OF NORTH AMERICA, INC.

Version with reversing camera: 

After adjusting, check reversing camera and if necessary recalibrate.  See 66 53 010 CALIBRATING REVERSING CAMERA .