51 23 131 Adjusting Left Or Right Striker On Engine Hood/Bonnet
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Adjusting striker is described in 41 61 014 ADJUSTING ENGINE BONNET/HOOD
.
Unfasten screws (1) and remove striker (2).
Tightening torque. See BODY EQUIPMENT - TIGHTENING TORQUES .
Left side only:
Disconnect Bowden cable (3).
Installation:
Adjusting hood/bonnet . See 41 61 014 ADJUSTING ENGINE BONNET/HOOD .