51 16 160 Removing And Installing/Replacing Centre Console Trim
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 323
Necessary preliminary tasks:
- Remove knob for controller . See 61 31 192 REPLACING KNOB FOR CONTROLLER .
Engage special tool 00 9 323 at trim (1) and lever out of retainers (2).
Installation:
If necessary, replace faulty retainers (2).