41 00... Riveting Steel Parts

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

1.0 Recommended tools and equipment
- Manual riveting tool for blind rivet nuts and bolts.
2.0 Setting blind rivet nuts and blind rivet bolts:
- Drill holes (0.2 mm larger than the outside diameter of the blind rivet nuts or blind rivet bolts).
- Blind rivet nuts and bolts must have a special coating for corrosion reasons.
  Use the blind rivet nuts and bolts supplied in the case of the manual riveting tool for steel only!
- Insert blind rivet nuts or bolts and tighten down with the riveting tool.