LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1433 (Integrated Suspension Systems - Repair) >> 13 Connecting Lines >> 37 13 100 Removing and Installing/Replacing Pressure Lines For Oscillating Motor/Front Axle

37 13 100 Removing and Installing/Replacing Pressure Lines For Oscillating Motor/Front Axle

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Remove front pressure lines (1) (from oscillating motor to junction I at side in wheel arch). See 37 13 110 Removing and Installing/Replacing Pressure Lines For Oscillating Motor/Rear Axle 

Remove rear pressure lines (2) (from junction I to valve block). See 37 13 110 Removing and Installing/Replacing Pressure Lines For Oscillating Motor/Rear Axle 

Fig 1: Identifying Front And Rear Pressure Lines
G04794864Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals