36 10 715 Checking Rim For Face And Radial RUNOUT
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove wheel
- Checking front and rear wheel for face and radial runout
- Pull tire off rim
- Remove fitted balance weights
- Remove dirt from rim well and rim flange
IMPORTANT:
Disk wheels must not be repaired!
Mount disk wheel in balancing machine.
Use suitable wheel centering element supplied with corresponding balancing machine.
- Basic flange
- Wheel centering element
- Type flange
- Clamping nut