22 32 050 Replacing Cross-Member For Transmission Mounting

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required:

Supporting Transmission:

Support with special tools 23 4 050, 23 0 132 and 00 2 030 00 2 030 UNIVERSAL HYDRO-LIFTER BASIC UNIT .

Secure transmission with tensioning strap (1).

Tasks are described in TRANSMISSION BRACKET .

Fig 1: Identifying Special Tools (23 4 050, 23 0 132) And (00 2 030)

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws.

Tightening torque 22 32 4AZ22 32 TRANSMISSION MOUNTS .

Release screw (1).

Tightening torque 22 32 5AZ22 32 TRANSMISSION MOUNTS .

Remove cross-member.

Fig 2: Identifying Screw

Courtesy of BMW OF NORTH AMERICA, INC.

00 2 030 00 2 030 UNIVERSAL HYDRO-LIFTER BASIC UNIT
23 0 13223 TRANSMISSION DESIGNATIONS
23 4 05023 .. UNIVERSAL TRANSMISSION BRACKET

Necessary preliminary tasks:

Remove underbody protection51 47 491 REMOVING AND INSTALLING/REPLACING REAR UNDERBODY PROTECTION
Remove heat shields
Remove exhaust system18 00 020 REMOVING AND INSTALLING COMPLETE EXHAUST SYSTEM (N62TU) .