13 54 250 Replacing Intake Hose (N52K)
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Switch off ignition
- Remove intake filter housing. See 13 71 000 Removing and installing/replacing intake filter housing (N52K)
Remove wiring harness (1) from holder and place to one side. Unfasten clip.
Tightening torque 13 71 1AZ, see 13 71 AIR INTAKE SILENCER .
Detach air-mass flow sensor (2) from throttle valve assembly.