11 43 000 Removing And Installing/Sealing Guide Tube For Oil Dipstick (N62)

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove intake air manifold . See 11 61 050 REMOVING AND INSTALLING INTAKE AIR MANIFOLD (N62) .
Drain engine oil.

NOTE: For purposes of clarity, this work step is shown on the engine after it has been removed.

Unlock and detach vacuum line (1).

Release screws and remove check valve (2).

Remove guide tube (3) upwards.

Installation:

Replace sealing ring on guide tube.

Apply light coat of oil to seal.

Replacing sealing ring on check valve pipe.

Apply light coat of oil to seal.

Fig 1: Locating Vacuum Line And Check Valve

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Check engine for leaks.