00 2 480 Measurement Stand With Clamp

WARNING: This page is about a different car, the 2008 BMW Alpina, 2008 BMW 750i, 2007 BMW Alpina, 2007 BMW 750i, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47T2, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57T2, M57TU, M60, M62, M62VAN, M67, M67TU, M70, M73, M88, N40, N42, N45, N46, N52, N62, N62TU, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, W10, W11, W17

SI number: 118 99(489)

Order number: 00 2 480

Measurement stand with clamp

Consisting of:

1 = 00 2 481 Clamping foot

2 = 00 2 482 Clamping piece

3 = 00 2 483 Shaft

4 = 00 2 484 Shaft

Fig 1: Identifying Measurement Stand With Clamp (00 2 480)

Courtesy of BMW OF NORTH AMERICA, INC.