00 2 300 Assembly Stand With Universal Flange

WARNING: This page is about a different car, the 2008 BMW Alpina, 2008 BMW 750i, 2007 BMW Alpina, 2007 BMW 750i, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Note: For accommodating engines from S85

Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47T2, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57T2, M57TU, M60, M62, M62VAN, M67, M67TU, M70, M73, M88, N40, N42, N45, N46, N51, N52, N53, N54, N62, N62TU, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, S85, W10, W11, W17

SI number: 01 25 04 (155)

Order number: 00 2 300

Assembly stand with universal flange

Consisting of:

1 = 00 2 301 Assembly stand

2 = 00 2 302 Universal flange

3 = 00 2 303 Crank

4 = 00 2 304 Protection hood

5 = 00 2 305 Storage for small parts

6 = 00 2 306 Moulded tray, rear

7 = 00 2 307 Oil drip tray

8 = 00 2 308 Moulded tray, front

9 = 00 2 309 Wheel, front (without stop)

10 = 00 2 311 Wheel, rear (with stop)

11 = 00 2 312 Set of rippled mats

Fig 1: Identifying Assembly Stand With Universal Flange (00 2 300)

Courtesy of BMW OF NORTH AMERICA, INC.