33 21 Output Shaft
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.
OUTPUT SHAFT TIGHTENING TORQUES
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Output shaft to rear axle differential and drive flange | - | - | - | - |
| Hexagon socket screw | E30, E32, E34 | M10x50 10.9 | Replace screws | 60 Nm |
| Torx screw without ribbed teeth | E30, E31, E32, E34, E36, E38 | M10x50 10.9 (black) | Replace screws | 60 Nm |
| Torx screw with ribbed teeth | E36, E39, E46 | M8x40 (black) | Replace screws | 64 Nm |
| - | E36, E39, E46, E60, E83, E85 | M8x40 (silver) | Replace screws | 52 Nm |
| - | E36 / M54 / Z3 3.0i, E46 | M10x23 10.9 (silver) | Replace screws | 85 Nm |
| - | E30, E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E83, E85, E86 | M10 (silver) | Replace screws | 80 Nm |
| - | E36 / Z3 2.8i, E36 / S50 / S52 / S54, E46 / S54, E85 / S54, E86 / S54 | M10x46 10.9 (black) | Replace screws | 100 Nm |
| - | E31, E38, E39, E60, E63, E64 | M12x50 10.9 (black) | Replace screws | 135 Nm |