24 21 Input, Intermediate and Output Shafts
WARNING: This page is about a different car, the 2006 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.
INPUT, INTERMEDIATE AND OUTPUT SHAFTS TIGHTENING TORQUES
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Flange nut, output flange | A5S 300J | - | - | 225 Nm |
| Flange nut, output flange without spring washer | A5S 360R | - | - | 30 Nm |
| Flange nut, output flange, with spring washer | A5S 360R / A5S 390R / A4S 200R | - | - | 60 Nm |
| - | A4S 270R / A4S 310R | - | - | 100 Nm |