LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1404 (Engine And Transmission Mounting - Tightening Torques) >> 11 Engine Suspension >> 22 11 Engine Suspension

22 11 Engine Suspension

WARNING: This page is about a different car, the 2008 BMW 760Li and 2007 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE SUSPENSION TIGHTENING TORQUES

- Type Thread Tightening specification Measure
1AZ Engine mount to front axle support E52/E85/E86 - - 42 Nm
- E60/E61/E63/E64/E65/E66/E67/E92 M8-8 - 19 Nm
- E60/N54, E60/N53,N52, E61/N53,N52, N54 M8-8 - 21 Nm
- E53 M8-10.9 - 30 Nm
- E87/E90/E91/E92/E93/E70/E83/E81 M8 10.9 - 28 Nm
- E70/E83 M10 - 38 Nm
2AZ Engine mount to engine support arm E60/E61/E63/E64/E65/E66/E67/E53/E83/E87/E90/E91/E92/E93/E70/E81 M10 10.9 - 56 Nm
- E65/E66/E67 M12 10.9 - 100 Nm
- E70/E83 M12 - 68 Nm
- E85/E86/E52 - - 42 Nm
- E92 M10 - 38 Nm
3AZ Engine support arm to engine E60/E61/E63/E64/E65/E66/E67/E83/E87/E90/E91/E70/E81/E92/E93 M10 8.8 - 38 Nm
- E60/61 N52/E63/64 N52/E83/85 N52/E86 N52/E87/90 N52/E91 N52/E65 N52/E92 N51/N52/E70 N52 M12 Aluminum screws marked blue must be replaced -
- - - 1. Jointing torque 34 Nm
- - - 2. Angle of rotation 90°
- - - 3. Angle of rotation 20°
- E60/E61/E65/E66/E67 M8 8.8 - 19 Nm
- E85/E83 M8 8.8 - 21 Nm
- E53 (N62/M54) - - 38 Nm
- E53 (M57) - - 65 Nm
- E92/E90 (N54) M12 - 66 Nm
- E60(N53)/E61 (N53)/E87 (N52K)/E81 (N52K) - 1. Jointing torque 34 Nm
- - - 2. Angle of rotation 100°
- - - marked blue must be replaced -
- E60 (N54) M12 - 66 Nm
4AZ Engine mount to mounting bracket E65/E60/E61/E63/E64 M8 8.8 - 21 Nm
5AZ Mounting bracket to front axle carrier E65/E60/E61/E63/E64 M8-8 - 21 Nm
6AZ Vibration damper to engine carrier E70 - - 19 Nm
7AZ Reinforcement plate to front axle carrier E90/E91/E92 M8 - 19 Nm
8AZ Support angle to engine mount or front axle carrier E90/E91/E92 M8 - 19 Nm