11 13 Oil Pan
WARNING: This page is about a different car, the 2008 BMW 760Li and 2007 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
OIL PAN TIGHTENING TORQUES
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Oil drain plug | - | M12 x 1.5 | - | 25 Nm |
| - | - | M18 x 1.5 | - | 35 Nm |
| - | - | M22 x 1.5 | - | 60 Nm |
| 2AZ Oil pan on engine block | - | M6 8.8 | - | 10 Nm |
| - | - | M6 10.9 | - | 12 Nm |
| - | N40/N42/N45/N46 | M8 8.8 | Replace screws | 30 Nm |
| - | - | M8 8.8 | - | 22 Nm |
| Oil sump, lower section to upper section | - | M6 8.8 | - | 10 Nm |
| - | N62TU | M8 | - | 24 Nm |
| - | - | M8 8.8 | - | 22 Nm |
| Oil sump bottom section to top section with microencapsulated screws | - | M6 10.9 | Replace screws | 12 Nm |
| Oil sump upper section to crankcase | N62TU | M6 | - | 10 Nm |
| - | N62TU | M8 | - | 20 Nm |