64 52 A/C Compressor
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES - A/C COMPRESSOR
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Refrigerant lines to A/C compressor | E70 | M8 | 21 Nm | |
| E60 / N47, E61 / N47, E81, E87, E82, E90 / N47, E91 / N47, E92 / N47 | M8 | 18.5 Nm | ||
| E92 / S65 | M8 | 21 Nm | ||
| 2AZ Filler plug, A/C compressor | E70 | 30 ±1 Nm | ||
| E81 / N43, E82 | 25 Nm | |||
| 3AZ A/C compressor to carrier | N52, N52K | M8 x 87 | Replace aluminium screw/bolt | 10 Nm + 180±15 ° |
| M8 x 87 | Replace aluminium screw/bolt | 10 Nm + 90±15 ° |
||
| N43 | M8 | 23 Nm | ||
| N47 | M8 | 19 Nm | ||
| N54 | M8 | 19 Nm | ||
| N55 | M8 | 19 Nm | ||
| M57 | M8 | 19 Nm | ||
| N62 | M8 | 21.4 ± 3.2 Nm | ||
| N63 | M8 | 21.4 ± 3.2 Nm | ||
| S63 | M8 | 21.4 ± 3.2 Nm | ||
| 5AZ Bearing support, compressor, to crankcase | E70 / E71 | 19 Nm | ||