63 14 120 Removing and installing or replacing rear reflector

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Unclip reflector (1) from bumper panel (2) in area (3).

Pull reflector (1) out of guide and detach towards rear from bumper panel.

Fig 1: Reflector And Bumper Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) on rear reflector must not be damaged.

Fig 2: Catches

Courtesy of BMW OF NORTH AMERICA, INC.