51 47 151 Removing and installing / replacing left luggage compartment wheel arch trim
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove inner window cavity cover strip, see 51 37 261 Removing and installing/replacing window cavity cover strip for door window, rear left or right
- Remove front trim for luggage compartment floor, see 51 47 131 Replacing front trim for luggage compartment floor
Release screws (1).
Right side only: Release screw in area (2).
Lever out trim (3) in direction of arrow and remove.
Feed luggage compartment wheel arch trim (4) at top out of roller sun blind mounting and remove from passenger compartment in direction of arrow.
Installation:
Guides (1) and catches (2) on trim (3) must not be damaged.
Replacement:
If necessary, detach sound insulation (1) from trim (2) and fit on new part.