17 22 Oil Cooler Pipes
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION - OIL COOLER PIPES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 5AZ Cap nut on transmission oil cooler (on radiator) and on transmission | All | M18 x 1.5 | 20 Nm | |
| 5HP30 | M22 x 1.5 | 28 Nm | ||
| 6AZ Oil lines on transmission | ||||
| Hollow bolt | All | M16 x 1.5 | 37 Nm | |
| 7AZ Oil lines on transmission oil cooler | A 5 S 300 J | 28 Nm | ||
| Hollow bolt | All | M14 x 1.5 | 27 Nm | |
| 8AZ Screw-in fitting on transmission | All | M14x1.5 und M16x1.5 | 37 Nm | |
| 9AZ Oil hose on oil pipe | E23 | 28 Nm | ||
| 10AZ Oil pipe bracket on radiator | E23 | 2 Nm | ||
| 11AZ Oil pipe bracket on body | E23 | 6.5 Nm | ||
| 12AZ Oil cooler on transmission | 5HP30 | 10 Nm | ||
| 13AZ Transmission oil cooler line to transmission | N42 | M8 | 21 Nm |