LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (DISC - 525i, 530i & 545i) >> Bleeding Brake System >> Bleeding Procedures >> Bleeding Front Or Rear-Axle Brake Circuit

Bleeding Front Or Rear-Axle Brake Circuit

WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect bleeder hose with container to bleed valve on right brake caliper.
  2. Open bleed valve.
  3. Run bleeding routine with BMW Diagnosis and Information System (DIS) with bleeder valve open.
  4. After running routine, press brake pedal 5 times to stop. Clear, bubble-free brake fluid must flow out.
  5. Close bleeder valve.
  6. Repeat procedure at left caliper.
scientia non olet · About LEMON Manuals