11 25 Pistons With Rings And Pins N62 B44
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
TECHNICAL DATA - PISTONS WITH RINGS AND PINS N62 B44
| Piston and pin are paired to each other - replace together only. | ||
| Measuring point "A" (position) | mm | 18 |
| Original, stage 0 (new dimension) | mm | 91.986 ± 0.016 |
| Oversize, stage 1 (new dimension) | mm | 92.236 ± 0.016 |
| Oversize, stage 2 (new dimension) | mm | 92.486 ± 0.016 |
| Piston installation clearance (piston new) | mm | 0.001...0.044 |
| Piston installation clearance (piston worn) | mm | 0.026...0.073 |
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.10 |