11 11 Engine Block, Cylinder Crankcase N62 B44
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
TECHNICAL DATA - ENGINE BLOCK, CYLINDER CRANKCASE N62 B44
| mm | 92.000+0.014 | |
| mm | 92.250 +0.014 | |
| mm | 92.500 +0.014 | |
| Permitted out-of-round of cylinder bore a) | mm | 0.007 |
| Permitted conicity of cylinder bore a) | mm | 0.01 |
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.10 |
| a) new status or recondition | ||