72 14 ... Removing and installing/replacing Top Tether eyelets for child seat

WARNING: This page is about a different car, the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Two or three Top Tether eyelets are installed, depending on the model.

Lever out covers (1) and release screws underneath.

Remove Top Tether eyelets (2).

For tightening torque refer to 52 24 03AZ in 52 24 REAR SEAT (NORMAL), MANUAL .

Fig 1: Top Tether Eyelets And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Ensure Top Tether eyelets (1) are in correct installation position.

It must be possible for Top Tether eyelets (1) to be tilted in the direction of head restraints (2).

Fig 2: Head Restraints And Tether Eyelets

Courtesy of BMW OF NORTH AMERICA, INC.