66 54 005 Removing and installing/replacing control unit for Night Vision System

WARNING: This page is about a different car, the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on Protection Against Electrostatic Damage (ESD Protection).

Necessary preliminary tasks:

Disconnect Battery Negative Lead
Remove safety information module.

Disconnect plug connection (1), press lug (2) downwards and remove control unit (3) from module carrier.

Fig 1: Plug Connection, Lug And Module Carrier Control Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out coding/programming.

NOTE: New component contains a CD with deblocking code.

CD is requested during coding/programming by the SSS