66 20 508 Removing and installing (replacing) control unit (Park Distance Control)

WARNING: This page is about a different car, the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove flap in right luggage compartment wheel arch trim.

Disconnect plug connections (1).

Unlock catch (2) in direction of arrow and pull out control unit (3) towards top.

Fig 1: Plug Connections, Catch, Control Unit And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out coding/programming.

Observe following IDC specifications:

Programming
Coding
Car & Key Memory
CD "CIP"

Fig 2: Identifying DIS Display

Courtesy of BMW OF NORTH AMERICA, INC.