65 82 010 Removing and Installing (Replacing) Control Display

WARNING: This page is about a different car, the 2006 BMW 760i, 2005 BMW 760i, and 2004 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Disconnect battery negative lead . See 12 00 ... INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY .
Remove wood trim on instrument panel on right. See 51 45 366 REMOVING AND INSTALLING/REPLACING WOOD TRIM ON RIGHT .

NOTE: Follow instructions for handling optical fibers . See 61 00 ... NOTES ON HANDLING OPTICAL FIBERS .

Release screws (1).

Remove control display (2) in direction of arrow.

Unlock plug connection behind and disconnect.

Remove control display (2).

Fig 1: Identifying Control Display & Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) of control display (2) must be exactly seated in mountings of instrument panel.

Fig 2: Identifying Guides Of Control Display

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out coding/programming.

Observe following IDC specifications:

Programming
Coding
Car & Key Memory
CD "CIP"

Fig 3: Identifying DIS Screen
Courtesy of BMW OF NORTH AMERICA, INC.