65 77 730 Removing and Installing (Replacing) Vehicle Center Sensor

WARNING: This page is about a different car, the 2006 BMW 760i, 2005 BMW 760i, and 2004 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Note airbag safety instructions! See 72 00 ... SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

Incorrect handling can activate airbag and cause injury.

NOTE: Follow instructions for handling optical fibers. See 61 00 ... NOTES ON HANDLING OPTICAL FIBERS .

Necessary preliminary tasks:

Disconnect battery negative lead and cover. See 12 00 ... INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY .
Remove center armrest. See 51 16 195 REMOVING AND INSTALLING CENTER ARMREST (FRONT) .

Unfasten plug connection (1) and disconnect.

Release screws (2) and remove vehicle center sensor (3).

Installation:

Tightening torque 65 77 6AZ . See 65 77 AIRBAG TRIGGERING CONTROL .

Make sure sensor is mounted without play.

Fig 1: Identifying Vehicle Center Sensor & Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out coding/programming.

Observe following IDC specifications:

Programming
Coding
Car & Key Memory
CD "CIP"

Fig 2: Identifying DIS Screen
Courtesy of BMW OF NORTH AMERICA, INC.