65 77 690 Removing and Installing/Replacing Central Gateway Module (Up To Build Date 03/2004)

WARNING: This page is about a different car, the 2006 BMW 760i, 2005 BMW 760i, and 2004 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove safety information module. See 65 77 700 REMOVING AND INSTALLING (REPLACING) SAFETY INFORMATION MODULE .

NOTE: Follow instructions for handling optical fibers . See 61 00 ... NOTES ON HANDLING OPTICAL FIBERS .

After installation:

Carry out coding/programming.

Fig 1: Identifying DIS Screen

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock catch (1) in direction of arrow.

Pull central gateway module (2) out of control unit carrier (3) slightly.

Disconnect plug connections (4).

Remove central gateway module (2).

Fig 2: Identifying Central Gateway Module & Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.