65 12 072 Removing and Installing (Replacing) Amplifier (Top Hi-Fi System)

WARNING: This page is about a different car, the 2006 BMW 760i, 2005 BMW 760i, and 2004 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Disconnect battery negative lead. See 61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD
Remove luggage compartment wheel arch trim on left. See 51 47 151 REMOVING AND INSTALLING/REPLACING LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM

NOTE: Follow instructions for handling optical fibers . See 61 00 ... NOTES ON HANDLING OPTICAL FIBERS

Pull out retaining plates (1) in direction of arrow.

Installation:

Make retaining plates (1) are correctly seated.

Remove amplifier (2) from holder (3).

Unlock plug connections (4) and disconnect.

Fig 1: Identifying Retaining Plates, Plug Connection & Amplifier

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out coding/programming.

Observe following IDC specifications:

Programming
Coding
Car & Key Memory
CD "CIP"

Fig 2: Identifying DIS Screen
Courtesy of BMW OF NORTH AMERICA, INC.