63 21 310 Replacing Circuit Board For Left or Right Rear Light (Up To 03/2005) (On Rear Lid)

WARNING: This page is about a different car, the 2006 BMW 760i, 2005 BMW 760i, and 2004 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear light . See 63 21 183 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT REAR LIGHT (UP TO 03/2005) (ON REAR LID)

Detach sealing frame for rear light (1) in direction of arrow.

Release screws (2).

Remove cover cap of rear light (4) from rear light (3).

Fig 1: Detaching Rear Light Sealing Frame

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure seal (1) is correctly seated in cover cap of rear light (2).

Fig 2: Identifying Cover Cap Of Rear Light & Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1).

Release screws (2).

Remove circuit board for rear light (3) from rear light (4).

Fig 3: Identifying Rear Light, Circuit Board, Plug Connection & Screws

Courtesy of BMW OF NORTH AMERICA, INC.