63 21 300 Replacing Circuit Board For Left or Right Rear Light (From 03/2005) (On Side Panel)

WARNING: This page is about a different car, the 2006 BMW 760i, 2005 BMW 760i, and 2004 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear light . See 63 21 180 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT REAR LIGHT (ON SIDE PANEL)

Disconnect plug connections (3).

Open catch (2) and fold out circuit board (1).

Installation:

Make sure circuit board (1) is correctly seated on supports (4).

Fig 1: Identifying Catch, Fold Out Circuit Board, Plug Connection & Supports

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (2).

Remove circuit board for rear light (1) from rear light.

Fig 2: Identifying Circuit Board & Screws

Courtesy of BMW OF NORTH AMERICA, INC.