61 31 203 Replacing Switch Combination For Seat Adjustment

WARNING: This page is about a different car, the 2006 BMW 760i, 2005 BMW 760i, and 2004 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 341

Remove and install center armrest (front) . See 51 16 195 REMOVING AND INSTALLING CENTER ARMREST (FRONT) .

CAUTION: Set down center armrest on a suitable surface.

Release screws (1).

Lever out front center armrest trim (2) with special tool 00 9 341 and remove and direction of arrow.

Fig 1: Identifying Special Tool (00 9 341)

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1).

Fig 2: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Feed out switch combination for seat adjustment (2) in direction of arrow.

Fig 3: Identifying Screws And Switch Combination

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure guides (1) are correctly seated in mountings (2).

Fig 4: Identifying Guides And Mountings

Courtesy of BMW OF NORTH AMERICA, INC.