LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1303 (General Electrical System - Repair Instructions) >> 31 Switch >> 61 31 016 Removing And Installing/Replacing Turn Indicator/Dimmer Stalk

61 31 016 Removing And Installing/Replacing Turn Indicator/Dimmer Stalk

WARNING: This page is about a different car, the 2006 BMW 760i, 2005 BMW 760i, and 2004 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Release screws (1).

Remove indicator/dimmer stalk (2) in direction of arrow.

Fig 1: Identifying Indicator/Dimmer Stalk
G04768544Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Seat turn signal/dimmer stalk (2) with integrated pin housing (1) exactly in fixture for steering column control.

Fig 2: Identifying Signal/Dimmer Stalk And Integrated Pin Housing
G04768545Courtesy of BMW OF NORTH AMERICA, INC.