LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1302 (Body Equipment - Repair Instructions) >> 47 Floor-Luggage-Eng Comp. Tr. Panels >> 51 47... Removing and Installing/Replacing Left or Right Underbody Paneling

51 47... Removing and Installing/Replacing Left or Right Underbody Paneling

WARNING: This page is about a different car, the 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

NOTE: Secure rear underbody paneling (3) against falling out.

Release expansion nuts (1).

Release screws (2).

Remove underbody paneling (4).

Fig 1: Identifying Rear Underbody Paneling & Expansion Nuts
G04775798Courtesy of BMW OF NORTH AMERICA, INC.