51 47 141 Removing and Installing/Replacing Panel For Luggage Compartment Partition

WARNING: This page is about a different car, the 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Pull out panel (2) in direction of arrow and remove.

Fig 1: Identifying Panel & Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Unhook luggage compartment net (1).

Release retainers (2) on reverse side and remove holder for luggage compartment net.

Fig 2: Identifying Luggage Compartment Net & Retainers

Courtesy of BMW OF NORTH AMERICA, INC.