LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1302 (Body Equipment - Repair Instructions) >> 45 Instrument Cluster >> 51 45... Removing and Installing/Replacing Center Instrument Panel Trim

51 45... Removing and Installing/Replacing Center Instrument Panel Trim

WARNING: This page is about a different car, the 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Remove  wood trim on instrument panel on right. See 51 45 366 REMOVING AND INSTALLING/REPLACING WOOD TRIM ON RIGHT 

Release screws (1).

Pull out trim (2) slightly in direction of arrow.

Fig 1: Identifying Trim & Screws
G04775737Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug (1) from PDC switch and detach.

Remove trim (2).

Installation: 

Make sure retainers (3) engage correctly in openings (4).

Fig 2: Identifying Retainers, Plug & Trim
G04775738Courtesy of BMW OF NORTH AMERICA, INC.