LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1302 (Body Equipment - Repair Instructions) >> 42 Rear Door Trim Panel >> 51 42 ... Replacing Airbag Badge On Rear Left or Right Door Trim Panel

51 42 ... Replacing Airbag Badge On Rear Left or Right Door Trim Panel

WARNING: This page is about a different car, the 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:

Risk of injury in event of airbag deployment:

Only the pairings listed below may be fitted.

The airbag badge must be replaced if the catches/retaining hooks are damaged.

Version up to 03/2004: 

Door trim panel (1) with completely punched-out hole (2): 

Airbag badge (3) with retaining hook (4) must be fitted.

Retaining hook (4) must be correctly inserted in bore of carrier for door trim panel (1).

Fig 1: Identifying Airbag Badge, Retaining Hook & Door Trim Panel
G04775655Courtesy of BMW OF NORTH AMERICA, INC.

Build date from 03/2004: 

Door trim panel (1) with 3 incisions (2): 

Airbag badge (3) with 3 catches (4) must be fitted.

Catches (4) must be correctly inserted in notches (2) of door trim panel (1).

Fig 2: Identifying Airbag Badge & Catches
G04775656Courtesy of BMW OF NORTH AMERICA, INC.