51 34 420 Removing and Installing/Replacing Trim On Window Frame Of Rear Door (Front), Left or Right

WARNING: This page is about a different car, the 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear window cavity cover strip See 51 22 302 REMOVING AND INSTALLING/REPLACING CHROME STRIP FOR WINDOW CAVITY COVER STRIP, REAR LEFT OR RIGHT

Partially detach rubber seal (1) and rubber guide (2).

Fig 1: Identifying Rubber Seal & Rubber Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Detach trim (2) towards front/top.

Fig 2: Identifying Screws And Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace faulty plastic nuts (1).

Fig 3: Identifying Plastic Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Sound insulation (1) on window frame (2) must be fitted.

Fig 4: Identifying Insulation & Window Frame

Courtesy of BMW OF NORTH AMERICA, INC.