51 13 440 Removing and Installing/Replacing Trim On Left or Right Rear Light

WARNING: This page is about a different car, the 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

IMPORTANT: Stick fabric adhesive tape (1) onto trim (3) to below guide (2) (risk of damage).

Snap out trim (3) with special tool 00 9 317 sideways.

Fig 1: Identifying Special Tools (00 9 317) (1 Of 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Snap out upper catch (1) with special tool 00 9 317 .

Slide trim (2) in direction of arrow and thereby release catch (1).

Fig 2: Identifying Special Tools (00 9 317) (2 Of 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) and guides (2) on trim (3) must not be damaged.

Fig 3: Identifying Catches & Guides On Trim

Courtesy of BMW OF NORTH AMERICA, INC.