51 13 000 Removing and Installing/Replacing Front Grille Center Section

WARNING: This page is about a different car, the 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove retaining hook from engine hood/bonnet See 51 23 160 REMOVING AND INSTALLING/REPLACING ARRESTER HOOK ON ENGINE HOOD

Unfasten screws (1 and 2).

Remove front grille center section (3) downwards.

Installation:

Align front grille center section (3) to engine hood/bonnet and secure with screws (2).

Fig 1: Identifying Front Grille Align Center Section

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (1) must not be damaged or missing.

Replacement:

Remove trim ring (2) for front grille See 51 13 007 REMOVING AND INSTALLING/REPLACING TRIM RING FOR FRONT GRILLE CENTER SECTION
Remove trim (3) from front grille See 51 13 ... REMOVING AND INSTALLING/REPLACING TRIM ON FRONT GRILLE CENTER SECTION

Fig 2: Identifying Trim Ring & Grille
Courtesy of BMW OF NORTH AMERICA, INC.