Special tools required:

WARNING: This page is about a different car, the 2008 BMW 760Li and 2007 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

00 1 450
11 0 000. See 11 0 000 ENGINE LIFTER FOR REMOVING AND INSTALLING ENGINES
11 0 151
11 0 152
Remove engine. See 11 00 050 REMOVING AND INSTALLING ENGINE (N62/N62TU)

Fit engine to special tool 00 1 450:

IMPORTANT: Only raise engine on locating lugs provided for this purpose.

Layout of front engine mount.

Illustrations show N62.

Fig 1: Locating Front Engine Mount

G04773530

Courtesy of BMW OF NORTH AMERICA, INC.

Layout of rear engine mount.

NOTE: Illustrations show N62.

Fig 2: Locating Rear Engine Mount

G04773531

Courtesy of BMW OF NORTH AMERICA, INC.

Raise engine with special tool 11 0 000. See 11 0 000 ENGINE LIFTER FOR REMOVING AND INSTALLING ENGINES

Fig 3: Identifying Special Tool (11 0 000)

G04773532

Courtesy of BMW OF NORTH AMERICA, INC.

Remove carrier bracket on cylinder bank 1 to 6.

Fit special tool 11 0 151 to cylinder bank 1 to 6.

Fig 4: Identifying Special Tool (11 0 151) On Cylinder Bank

G04773533

Courtesy of BMW OF NORTH AMERICA, INC.

Remove carrier bracket on cylinder bank 7 to 12.

Fit special tool 11 0 152 to cylinder bank 7 to 12.

Fig 5: Identifying Special Tool (11 0 152)

G04773534

Courtesy of BMW OF NORTH AMERICA, INC.

Install engine in special tool 00 1 450.

Snap locking pin (1) into place.

Close locking detent (2) on right and left and screw down.

Fig 6: Identifying Special Tool (00 1 450)

G04773535

Courtesy of BMW OF NORTH AMERICA, INC.